Basic Objective Mechanical Engineering BITS
 

Hello sir I am studying in Birla Institute of Technology and science now I want to get sample paper of Basic Objective Mechanical Engineering so please give me its paper.

Re: Basic Objective Mechanical Engineering BITS
 

You are studying in Birla Institute of Technology and science in Mechanical Engineering and you want to get the sample paper of objective Mechanical Engineering

So I am giving you some objective question of Mechanical Engineering it may help you

1. Which one of the following methods produces gear by generating process?
a. Hobbing b. Casting
c. Punching d. Milling
Answer: Hobbing

2. Metal in machining operation is removed by
a. Tearing chips
b. Distortion of metal
c. Shearing the metal across a zone
d. Cutting the metal across a zone
e. Pushing the metal with tool
Answer: Shearing the metal across a zone

3. A feeler gauge is used to check
a. Radius
b. Screw pitch
c. Surface roughness
d. Unsymmetrical shape
e. Thickness of clearance
Answer: Thickness of clearance

4. Compression ratio of I.C. Engine is
a. The ratio of volume of air in cylinder before compression stroke and after compression
b. Volume displaced by piston per stroke and clearance volume in cylinder
c. Ration of pressure after compression and before compression
d. Swept volume / cylinder volume
e. Cylinder volume / swept volume
Answer:
Volume displaced by piston per stroke and clearance volume in cylinder

You can get more questions after downloading the file.