MPSC Engineering Services Examination

I have applied for Engineering Services Examination conducted by MPSC. I have its syllabus but don’t have question papers. So tell me from which site I will download question papers of MPSC Engineering Services Examination?

[shikha]

As you are looking for question papers of MPSC Engineering Services Examination, so here I am providing following papers:

MPSC Engineering Services Examination Question Paper (Civil Engineering)
Define and briefly explain Newton's Law of Viscosity. Also differentiate between 10
kinematic and dynamic viscosity.
The surface tension of water in contact with air at 20°C is given as
0.0716 N/m. The pressure inside a droplet of water is to be 0.0147 ~/cm~ greater
than the outside pressure. Calculate the diameter of droplet of water.

What do you understand by most g,pnomical section of a channel. Also derive 10
the conditions for rectangular channel of most economical section.
A syphon of diameter 150 mm connects two reservoirs having a difference
in elevation of 15 m. The length of the syphon is 400 m and summit is 4 m above
the water level in the upper reservoir. The length of the pipe from upper reservoir
to summit is 80 m. Determine the discharge through syphon. Also determine the
pressure at summit, consider coefficient of friction as 0.020 and neglect minor
losses.

Describe the functions of main components of Pelton turbine with neat sketch. 10
Find the power required to drive a centrifugal pump which delivers 0.04
cubic metre per second of water to a height of 20 m through a 15 cm diameter
pipe and 100 m long. The overall efficiency of the pump is 70%. Consider
coefficient of friction as 0.06.

Explain the phenomenon of capillarity and obtain an expression for capillary 10
rise of a liquid.
A rectangular tank 4 m long, 1.5 m wide contains water upto a height of
2 m. Calculate the force due to water pressure on the base of the tank. Also find
the direction of this force and depth of centre of pressure from free surface.

Distinguish between following :
(i) Uniform flow and non uniform flow '"a
(ii) Steady flow and unsteady flow
(iii) Rotational flow and irrotational flow

What are the limitations of Bernoulli's theorem ? Water is flowing through
a pipe having diameters 20 cm and 15 cm at sections 1 and 2 respectively. The
discharge through the pipe is 0.04 cumec. The section 1 is 6 m above datum line
and section 2 is 3 m above datum. If pressure at section 1 is 29.43 ~/cm~, what
is the pressure at section 2 ?

A rectangular channel carries water at the rate of 0.5 cumec when bed slope is 1 10
in 3000. Find the most economical dimension of the channel if C is 60.
List any three dimensionless numbers. Also explain their significances for
fluid flow problems.

Describe the working of reciprocating pump with a neat sketch. 10
Draw a typical layout of hydroelectric power house and name the
components.

MPSC Engineering Services Examination Question Paper (Civil Engineering)